SRF2023 - List of Authors (Popielarski, J.T.)

Paper	Title	Page
TUPTB063	Fabrication Efforts Toward a Superconducting Rf Photo-Infector Quarter-Wave Cavity for Use in Low Emittance Injector Applications	568
	C. Compton NSCL, East Lansing, Michigan, USA K. Elliott, W. Hartung, J.D. Hulbert, S.H. Kim, T. Konomi, S.J. Miller, M.S. Patil, J.T. Popielarski, L. Popielarski, K. Saito, K. Witgen, T. Xu FRIB, East Lansing, Michigan, USA M. Kedzie, M.P. Kelly, T.B. Petersen ANL, Lemont, Illinois, USA J.W. Lewellen, J. Smedley SLAC, Menlo Park, California, USA
	Funding: * Work supported by the Department of Energy Contract DE-AC02- 76SF00515 The Facility for Rare Isotope Beams (FRIB), in collaboration with Argonne National Laboratory (ANL) and Helmholtz-Zentrum Dresden-Rossendorf (HDZR), is working on the design and fabrication of a photo-injector cryomodule; suitable for operation as part of accelerator systems at SLAC National Accelerator Laboratory. Project scope requires the fabrication of two 185.7 MHz superconducting, quarter-wave resonators (QWR) based, injector cavities. Cavity fabrication will be completed at FRIB with contracted vendors supporting subcomponent fabrication and electron-beam welding. Fabrication will use poly-crystalline and large grain RRR niobium materials. The current status of cavity fabrication will be presented including material procurement, prototype forming, and electron-beam welding development.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB063
About •	Received ※ 17 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 21 August 2023 — Issue date ※ 21 August 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Fabrication Efforts Toward a Superconducting Rf Photo-Infector Quarter-Wave Cavity for Use in Low Emittance Injector Applications

568

C. Compton
NSCL, East Lansing, Michigan, USA
K. Elliott, W. Hartung, J.D. Hulbert, S.H. Kim, T. Konomi, S.J. Miller, M.S. Patil, J.T. Popielarski, L. Popielarski, K. Saito, K. Witgen, T. Xu
FRIB, East Lansing, Michigan, USA
M. Kedzie, M.P. Kelly, T.B. Petersen
ANL, Lemont, Illinois, USA
J.W. Lewellen, J. Smedley
SLAC, Menlo Park, California, USA

Funding: * Work supported by the Department of Energy Contract DE-AC02- 76SF00515
The Facility for Rare Isotope Beams (FRIB), in collaboration with Argonne National Laboratory (ANL) and Helmholtz-Zentrum Dresden-Rossendorf (HDZR), is working on the design and fabrication of a photo-injector cryomodule; suitable for operation as part of accelerator systems at SLAC National Accelerator Laboratory. Project scope requires the fabrication of two 185.7 MHz superconducting, quarter-wave resonators (QWR) based, injector cavities. Cavity fabrication will be completed at FRIB with contracted vendors supporting subcomponent fabrication and electron-beam welding. Fabrication will use poly-crystalline and large grain RRR niobium materials. The current status of cavity fabrication will be presented including material procurement, prototype forming, and electron-beam welding development.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB063

About •

Received ※ 17 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 21 August 2023 — Issue date ※ 21 August 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)