SRF2023 - List of Authors (Steinbrück, R.)

Paper	Title	Page
MOPMB067	Design of a Cathode Insertion and Transfer System for LCLS-II-HE SRF Gun	267
	R. Xiang, A. Arnold, S. Gatzmaga, A. Hoffmann, P. Murcek, R. Steinbrück, J. Teichert HZDR, Dresden, Germany C. Adolphsen, J. Smedley SLAC, Menlo Park, California, USA W. Hartung, S.H. Kim, T.K. Konomi, S.J. Miller, L. Popielarski, K. Saito, T. Xu FRIB, East Lansing, Michigan, USA M.P. Kelly, T.B. Petersen ANL, Lemont, Illinois, USA J.W. Lewellen LANL, Los Alamos, New Mexico, USA
	Funding: Work supported by cooperation project between MSU and HZDR RC113062 from the U.S. Department of Energy Office of Science under Cooperative Agreement DE-AC02-76SF00515. Superconducting radio frequency photo injectors (SRF gun) offer advantages for operating in continuous wave (CW) mode and generating high-brightness and high-current beams. A new SRF gun is designed as a low emittance photo injector for LCLS-II-HE and a prototype gun is currently being developed under collaboration between SLAC, FRIB, HZDR and ANL. The aim is to demonstrate stable CW operation at a cathode gradient of 30 MV/m. One of the crucial component for successful SRF gun operation is the photocathode system. The new SRF gun will adopt the HZDR-type cathode, which includes a cathode holder fixture (cathode stalk) developed by FRIB and a sophisticated cathode exchange system designed by HZDR. This innovative cathode insertion system ensures accurate, particle-free and warm cathode exchanges. A novel alignment process targets the cathode to the stalk axis without touching cathode plug itself. To commission the prototype gun, metallic cathodes will be used. A specifically designed vacuum system ensures vacuum pressure of 10^-9 mbar for transport of a single cathode from the cleanroom to the gun. Thus maintaining cathode quality.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB067
About •	Received ※ 18 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 18 July 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRIBA06	Operational Experience From 8 Years of ELBE SRF-Gun II
	A. Arnold, M. Freitag, M. Justus, U. Lehnert, P.N. Lu, S. Ma, P. Michel, P. Murcek, A.A. Ryzhov, J. Schaber, Ch. Schneider, R. Steinbrück, J. Teichert, R. Xiang HZDR, Dresden, Germany G. Ciovati, P. Kneisel, H. Vennekate JLab, Newport News, VA, USA
	At the electron accelerator for beams with high brilliance and low emittance (ELBE), the second version of a superconducting radio-frequency (SRF) photoinjector was brought into operation in 2014. After a period of commissioning, a gradual transfer to routine operation took place in 2017, so that now more than 1800h of user beam are generated every year. Since the commission, a total of 24 cathodes (2 Cu, 12 Mg, 10 Cs₂Te) have been used, without observing serious cavity degradation. The contribution summarizes commissioning and operational experience of the last 8 years of gun operation, with special emphasis on SRF properties but also on specialties such as dark current and multipacting that are directly linked to the integration of a normal conducting cathode into the SRF cavity.
	Slides FRIBA06 [6.709 MB]
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of a Cathode Insertion and Transfer System for LCLS-II-HE SRF Gun

267

R. Xiang, A. Arnold, S. Gatzmaga, A. Hoffmann, P. Murcek, R. Steinbrück, J. Teichert
HZDR, Dresden, Germany
C. Adolphsen, J. Smedley
SLAC, Menlo Park, California, USA
W. Hartung, S.H. Kim, T.K. Konomi, S.J. Miller, L. Popielarski, K. Saito, T. Xu
FRIB, East Lansing, Michigan, USA
M.P. Kelly, T.B. Petersen
ANL, Lemont, Illinois, USA
J.W. Lewellen
LANL, Los Alamos, New Mexico, USA

Funding: Work supported by cooperation project between MSU and HZDR RC113062 from the U.S. Department of Energy Office of Science under Cooperative Agreement DE-AC02-76SF00515.
Superconducting radio frequency photo injectors (SRF gun) offer advantages for operating in continuous wave (CW) mode and generating high-brightness and high-current beams. A new SRF gun is designed as a low emittance photo injector for LCLS-II-HE and a prototype gun is currently being developed under collaboration between SLAC, FRIB, HZDR and ANL. The aim is to demonstrate stable CW operation at a cathode gradient of 30 MV/m. One of the crucial component for successful SRF gun operation is the photocathode system. The new SRF gun will adopt the HZDR-type cathode, which includes a cathode holder fixture (cathode stalk) developed by FRIB and a sophisticated cathode exchange system designed by HZDR. This innovative cathode insertion system ensures accurate, particle-free and warm cathode exchanges. A novel alignment process targets the cathode to the stalk axis without touching cathode plug itself. To commission the prototype gun, metallic cathodes will be used. A specifically designed vacuum system ensures vacuum pressure of 10^-9 mbar for transport of a single cathode from the cleanroom to the gun. Thus maintaining cathode quality.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB067

About •

Received ※ 18 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 18 July 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRIBA06

Operational Experience From 8 Years of ELBE SRF-Gun II

A. Arnold, M. Freitag, M. Justus, U. Lehnert, P.N. Lu, S. Ma, P. Michel, P. Murcek, A.A. Ryzhov, J. Schaber, Ch. Schneider, R. Steinbrück, J. Teichert, R. Xiang
HZDR, Dresden, Germany
G. Ciovati, P. Kneisel, H. Vennekate
JLab, Newport News, VA, USA

At the electron accelerator for beams with high brilliance and low emittance (ELBE), the second version of a superconducting radio-frequency (SRF) photoinjector was brought into operation in 2014. After a period of commissioning, a gradual transfer to routine operation took place in 2017, so that now more than 1800h of user beam are generated every year. Since the commission, a total of 24 cathodes (2 Cu, 12 Mg, 10 Cs₂Te) have been used, without observing serious cavity degradation. The contribution summarizes commissioning and operational experience of the last 8 years of gun operation, with special emphasis on SRF properties but also on specialties such as dark current and multipacting that are directly linked to the integration of a normal conducting cathode into the SRF cavity.

Slides FRIBA06 [6.709 MB]

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)