SRF2023 - List of Authors (Eschke, J.)

Paper	Title	Page
MOPMB082	SRF Accelerating Modules Upgrade for Flash Linac at DESY	306
	D. Kostin, S. Barbanotti, J. Eschke, K. Jensch, N. Krupka, A. Muhs, D. Reschke, S. Saegebarth, J. Schaffran, P. Schilling, M. Schmökel, L. Steder, N. Steinhau-Kühl, A. Sulimov, E. Vogel, H. Weise, M. Wiencek, B. van der Horst DESY, Hamburg, Germany
	SRF accelerating modules with 8 TESLA-type 1.3 GHz SRF cavities are the main part of the linear accelerators currently in user operation at DESY, FLASH [1, 2] and the European XFEL [3, 4]. For the FLASH upgrade in 2022 [5] two accelerating modules have been exchanged in order to enhance the beam energy to 1.3 GeV. The two modules have been prototype modules for the European XFEL. After reassembly both modules were successfully tested and installed in the FLASH linac. Data taken during the commissioning at the end of 2022 did confirm the test results. This paper presents described efforts and their conclusions since last two years and continues the presentation given at SRF 2021 [6].
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB082
About •	Received ※ 16 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 27 June 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWB065	Impact of Medium Temperature Heat Treatments on the Magnetic Flux Expulsion Behavior of SRF Cavities	731
SUSPB043	use link to see paper's listing under its alternate paper code
	J.C. Wolff, J. Eschke, A. Gössel, K. Kasprzak, D. Reschke, L. Steder, L. Trelle, M. Wiencek DESY, Hamburg, Germany W. Hillert University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
	Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program. Medium temperature (mid-T) heat treatments at 300 °C are used to enhance the intrinsic quality factor of superconducting radio frequency (SRF) cavities. Unfortunately, such treatments potentially increase the sensitivity to trapped magnetic flux and consequently the surface resistance of the cavity. For this reason, it is crucial to maximize the expulsion of magnetic flux during the cool down. The flux expulsion behavior is next to the heat treatment mainly determined by the geometry, the niobium grain size and the grain orientation. However, it is also affected by parameters of the cavity performance tests like the cool down velocity, the spatial temperature gradient along the cavity surface and the magnetic flux density during the transition of the critical temperature. To improve the flux expulsion behavior and hence the efficiency of future accelerator facilities, the impact of these adjustable parameters as well as the mid-T heat treatment on 1.3 GHz TESLA-Type single-cell cavities is investigated by a new approach of a magnetometric mapping system. In this contribution first performance test results of cavities before- and after mid-T heat treatment are presented.
	Poster WEPWB065 [3.077 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB065
About •	Received ※ 21 June 2023 — Revised ※ 28 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 13 July 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

SRF Accelerating Modules Upgrade for Flash Linac at DESY

306

D. Kostin, S. Barbanotti, J. Eschke, K. Jensch, N. Krupka, A. Muhs, D. Reschke, S. Saegebarth, J. Schaffran, P. Schilling, M. Schmökel, L. Steder, N. Steinhau-Kühl, A. Sulimov, E. Vogel, H. Weise, M. Wiencek, B. van der Horst
DESY, Hamburg, Germany

SRF accelerating modules with 8 TESLA-type 1.3 GHz SRF cavities are the main part of the linear accelerators currently in user operation at DESY, FLASH [1, 2] and the European XFEL [3, 4]. For the FLASH upgrade in 2022 [5] two accelerating modules have been exchanged in order to enhance the beam energy to 1.3 GeV. The two modules have been prototype modules for the European XFEL. After reassembly both modules were successfully tested and installed in the FLASH linac. Data taken during the commissioning at the end of 2022 did confirm the test results. This paper presents described efforts and their conclusions since last two years and continues the presentation given at SRF 2021 [6].

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB082

About •

Received ※ 16 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 27 June 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWB065

Impact of Medium Temperature Heat Treatments on the Magnetic Flux Expulsion Behavior of SRF Cavities

731

SUSPB043

use link to see paper's listing under its alternate paper code

J.C. Wolff, J. Eschke, A. Gössel, K. Kasprzak, D. Reschke, L. Steder, L. Trelle, M. Wiencek
DESY, Hamburg, Germany
W. Hillert
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany

Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program.
Medium temperature (mid-T) heat treatments at 300 °C are used to enhance the intrinsic quality factor of superconducting radio frequency (SRF) cavities. Unfortunately, such treatments potentially increase the sensitivity to trapped magnetic flux and consequently the surface resistance of the cavity. For this reason, it is crucial to maximize the expulsion of magnetic flux during the cool down. The flux expulsion behavior is next to the heat treatment mainly determined by the geometry, the niobium grain size and the grain orientation. However, it is also affected by parameters of the cavity performance tests like the cool down velocity, the spatial temperature gradient along the cavity surface and the magnetic flux density during the transition of the critical temperature. To improve the flux expulsion behavior and hence the efficiency of future accelerator facilities, the impact of these adjustable parameters as well as the mid-T heat treatment on 1.3 GHz TESLA-Type single-cell cavities is investigated by a new approach of a magnetometric mapping system. In this contribution first performance test results of cavities before- and after mid-T heat treatment are presented.

Poster WEPWB065 [3.077 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB065

About •

Received ※ 21 June 2023 — Revised ※ 28 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 13 July 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)