SRF2023 - List of Authors (Sahuquet, P.)

Paper	Title	Page
MOPMB055	CEA Contribution to the PIP-II Linear Accelerator	234
	N. Bazin, S. Berry, J. Drant, M. Fontaine, P. Garin, H. Jenhani, A. Raut, P. Sahuquet, C. Simon CEA-DRF-IRFU, France J. Belorgey, Q. Bertrand, P. Brédy, E. Cenni, C. Cloué, R. Cubizolles, S. Ladegaillerie, A. Le Baut, A. Moreau, O. Piquet, J. Plouin CEA-IRFU, Gif-sur-Yvette, France
	The Proton Improvement Plan II (PIP-II) that will be installed at Fermilab is the first U.S. accelerator project that will have significant contributions from international partners. CEA joined the international collaboration in 2018 and will deliver 10 low-beta cryomodules as In-Kind Contributions to the PIP-II project, with cavities supplied by LASA-INFN (Italy) and VECC-DAE (India), and power couplers and tuning systems supplied by Fermilab. An important milestone was reached in March 2023 with the Final Design Review of the cryomodule, launching the pre-production phase. This paper presents the status CEA activities on the design, manufacturing, assembly and tests of the cryomodules and the upgrade of the existing infrastructures to the PIP-II requirements.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB055
About •	Received ※ 25 June 2023 — Revised ※ 26 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 03 July 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWB064	Performance Analysis from ESS Cryomodule Testing at CEA	727
	O. Piquet, C. Arcambal, Q. Bertrand, P. Bosland, E. Cenni, G. Devanz, T. Hamelin CEA-IRFU, Gif-sur-Yvette, France P. Sahuquet CEA-DRF-IRFU, France
	CEA Saclay is in charge of the production of 30 elliptical cavities cryomodule as part of the in Kind contribution to the ESS superconducting. The two medium and high beta prototypes and the three first of each type of the series cryomodules have been tested at CEA in slightly different conditions than at ESS (both in terms of cryogenic operation as well as RF conditions). The goal of these tests was to validate the assembly procedure before the delivery of the series to ESS where the final acceptance tests are performed. This paper summarizes the main results obtained during the tests at CEA with a particular attention to the field emission behaviour.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB064
About •	Received ※ 20 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 07 July 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMB057	Implementation of the Test Bench for the PIP-II LB650 Cryomodules at CEA	243
	H. Jenhani, N. Bazin, Q. Bertrand, P. Brédy, L. Maurice, O. Piquet, P. Sahuquet, C. Simon CEA-IRFU, Gif-sur-Yvette, France
	The Proton Improvement Plan II (PIP-II) at Fermilab is the first U.S. accelerator project that will have significant contributions from international partners. As a part of the French In-Kind Contributions to this project, CEA will provide ten 650 MHz low-beta cryomodules (LB650) equipped with LASA-INFN (Italy) and VECC-DAE (India) cavities and Fermilab power couplers and RF tuning systems. CEA is accordingly in charge of the design, manufacturing, assembly and testing of these cryomodules. This paper presents the future implementation of the test stand dedicated to the cryogenic and RF power testing of the LB650 cryomodules. The choice of the equipment and the current status will be detailed, as well.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB057
About •	Received ※ 19 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 05 July 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEIBA01	Surface Engineering by ALD for Superconducting RF Cavities	615
	Y. Kalboussi, C.Z. Antoine, M. Baudrier, Q. Bertrand, C. Boulch, B. Delatte, G. Jullien, L. Maurice, Th. Proslier, P. Sahuquet, T.V. Vacher CEA-IRFU, Gif-sur-Yvette, France M. Asaduzzaman, T. Junginger UVIC, Victoria, Canada M. Asaduzzaman TRIUMF, Vancouver, Canada D. Dragoe ICMMO, Orsay, France F. Éozénou CEA-DRF-IRFU, France N. Lochet CEA, DES, Université Paris-Saclay, Gif-sur-Yvette, France D. Longuevergne, T. Pépin-Donat Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France F. Miserque CEA, LECA, Université Paris-Saclay, Gif-sur-Yvette, France
	Atomic Layer Deposition is a synthesis method that enable a unique control of thin films chemical composition and thickness over complex shape objects such as SRF cavities. This level of control opens the way to new surface treatments and to study their effect on RF cavity performances. We will present coupon and, in some cases, preliminary cavity results, from various surface engineering routes based on the deposition of thin oxides and nitrides films combined with post annealing treatments and study their interactions with the niobium. Three main research directions will be presented: 1/ replacing the niobium oxides by other surface layers (Al₂O₃, Y2O3, MgO) and probe their effect on the low and high field performances, 2/ doping with N and combine approaches 1/ and 2/ and finally 3/ optimize the superconducting properties of NbTiN multilayers on Nb and Sapphire.
	Slides WEIBA01 [13.613 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEIBA01
About •	Received ※ 06 July 2023 — Revised ※ 12 August 2023 — Accepted ※ 19 August 2023 — Issue date ※ 19 August 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

CEA Contribution to the PIP-II Linear Accelerator

234

N. Bazin, S. Berry, J. Drant, M. Fontaine, P. Garin, H. Jenhani, A. Raut, P. Sahuquet, C. Simon
CEA-DRF-IRFU, France
J. Belorgey, Q. Bertrand, P. Brédy, E. Cenni, C. Cloué, R. Cubizolles, S. Ladegaillerie, A. Le Baut, A. Moreau, O. Piquet, J. Plouin
CEA-IRFU, Gif-sur-Yvette, France

The Proton Improvement Plan II (PIP-II) that will be installed at Fermilab is the first U.S. accelerator project that will have significant contributions from international partners. CEA joined the international collaboration in 2018 and will deliver 10 low-beta cryomodules as In-Kind Contributions to the PIP-II project, with cavities supplied by LASA-INFN (Italy) and VECC-DAE (India), and power couplers and tuning systems supplied by Fermilab. An important milestone was reached in March 2023 with the Final Design Review of the cryomodule, launching the pre-production phase. This paper presents the status CEA activities on the design, manufacturing, assembly and tests of the cryomodules and the upgrade of the existing infrastructures to the PIP-II requirements.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB055

About •

Received ※ 25 June 2023 — Revised ※ 26 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 03 July 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWB064

Performance Analysis from ESS Cryomodule Testing at CEA

727

O. Piquet, C. Arcambal, Q. Bertrand, P. Bosland, E. Cenni, G. Devanz, T. Hamelin
CEA-IRFU, Gif-sur-Yvette, France
P. Sahuquet
CEA-DRF-IRFU, France

CEA Saclay is in charge of the production of 30 elliptical cavities cryomodule as part of the in Kind contribution to the ESS superconducting. The two medium and high beta prototypes and the three first of each type of the series cryomodules have been tested at CEA in slightly different conditions than at ESS (both in terms of cryogenic operation as well as RF conditions). The goal of these tests was to validate the assembly procedure before the delivery of the series to ESS where the final acceptance tests are performed. This paper summarizes the main results obtained during the tests at CEA with a particular attention to the field emission behaviour.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB064

About •

Received ※ 20 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 07 July 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMB057

Implementation of the Test Bench for the PIP-II LB650 Cryomodules at CEA

243

H. Jenhani, N. Bazin, Q. Bertrand, P. Brédy, L. Maurice, O. Piquet, P. Sahuquet, C. Simon
CEA-IRFU, Gif-sur-Yvette, France

The Proton Improvement Plan II (PIP-II) at Fermilab is the first U.S. accelerator project that will have significant contributions from international partners. As a part of the French In-Kind Contributions to this project, CEA will provide ten 650 MHz low-beta cryomodules (LB650) equipped with LASA-INFN (Italy) and VECC-DAE (India) cavities and Fermilab power couplers and RF tuning systems. CEA is accordingly in charge of the design, manufacturing, assembly and testing of these cryomodules. This paper presents the future implementation of the test stand dedicated to the cryogenic and RF power testing of the LB650 cryomodules. The choice of the equipment and the current status will be detailed, as well.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB057

About •

Received ※ 19 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 05 July 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEIBA01

Surface Engineering by ALD for Superconducting RF Cavities

615

Y. Kalboussi, C.Z. Antoine, M. Baudrier, Q. Bertrand, C. Boulch, B. Delatte, G. Jullien, L. Maurice, Th. Proslier, P. Sahuquet, T.V. Vacher
CEA-IRFU, Gif-sur-Yvette, France
M. Asaduzzaman, T. Junginger
UVIC, Victoria, Canada
M. Asaduzzaman
TRIUMF, Vancouver, Canada
D. Dragoe
ICMMO, Orsay, France
F. Éozénou
CEA-DRF-IRFU, France
N. Lochet
CEA, DES, Université Paris-Saclay, Gif-sur-Yvette, France
D. Longuevergne, T. Pépin-Donat
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
F. Miserque
CEA, LECA, Université Paris-Saclay, Gif-sur-Yvette, France

Atomic Layer Deposition is a synthesis method that enable a unique control of thin films chemical composition and thickness over complex shape objects such as SRF cavities. This level of control opens the way to new surface treatments and to study their effect on RF cavity performances. We will present coupon and, in some cases, preliminary cavity results, from various surface engineering routes based on the deposition of thin oxides and nitrides films combined with post annealing treatments and study their interactions with the niobium. Three main research directions will be presented: 1/ replacing the niobium oxides by other surface layers (Al₂O₃, Y2O3, MgO) and probe their effect on the low and high field performances, 2/ doping with N and combine approaches 1/ and 2/ and finally 3/ optimize the superconducting properties of NbTiN multilayers on Nb and Sapphire.

Slides WEIBA01 [13.613 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEIBA01

About •

Received ※ 06 July 2023 — Revised ※ 12 August 2023 — Accepted ※ 19 August 2023 — Issue date ※ 19 August 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)