Paper | Title | Page |
---|---|---|
MOPMB082 | SRF Accelerating Modules Upgrade for Flash Linac at DESY | 306 |
|
||
SRF accelerating modules with 8 TESLA-type 1.3 GHz SRF cavities are the main part of the linear accelerators currently in user operation at DESY, FLASH [1, 2] and the European XFEL [3, 4]. For the FLASH upgrade in 2022 [5] two accelerating modules have been exchanged in order to enhance the beam energy to 1.3 GeV. The two modules have been prototype modules for the European XFEL. After reassembly both modules were successfully tested and installed in the FLASH linac. Data taken during the commissioning at the end of 2022 did confirm the test results. This paper presents described efforts and their conclusions since last two years and continues the presentation given at SRF 2021 [6]. | ||
DOI • | reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB082 | |
About • | Received ※ 16 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 27 June 2023 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THCAA02 | Commissioning of the UHH Quadrupole Resonator at DESY | 952 |
SUSPB045 | use link to see paper's listing under its alternate paper code | |
WEPWB074 | use link to see paper's listing under its alternate paper code | |
|
||
Funding: This work was supported by the BMBF under the research grants 05H18GURB1, 05K19GUB and 05H2021. Pushing the limits of the accelerating field or quality factor of SRF cavities beyond pure Nb requires the implementation of specific inner surface treatments, which are yet to be studied and optimized. One of the fundamental challenges in exploring alternative materials is that only samples or cavity cuts can be fully characterized from a material point of view. On the other hand, complete cavities allow for the SRF characterization of the inner surface, while samples can usually only be analyzed using DC methods. To address this problem, a test resonator for samples, called "Quadrupole Resonator", was designed and operated at CERN and later at HZB. It allows for a full RF characterization of samples at frequencies of 0.42 GHz, 0.86 GHz, and 1.3 GHz, within a temperature range of 2-20 K and at magnetic fields up to 120 mT. This work presents the design process, which incorporated improvements motivated by mechanical and RF studies and experience, and the results from both warm and cold commissioning are discussed. More important, the results for the RF tests of a Nb sample after undergoing a series of heat treatments and an outlook of the further usage of the QPR is presented. |
||
Slides THCAA02 [6.677 MB] | ||
DOI • | reference for this paper ※ doi:10.18429/JACoW-SRF2023-THCAA02 | |
About • | Received ※ 25 June 2023 — Revised ※ 29 June 2023 — Accepted ※ 19 August 2023 — Issue date ※ 19 August 2023 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |